Dyneema SK99 XTR| Benvenuti Ropes

CARATTERISTICHE_TECNICHE: NOT FOUND

CORE   COVER
Resist. to peak of temp.   147 °C -
Tenacity   48,1 gr/den -
Coeff. di frictyion 0,06 -
Grip winch/stopper moderate -
Smoothness   excellent -
Abrasion resistance optimal -
Specific weight 0,97 kg/dm -
Res. to continuos work optimal -
Colors range   wide -

UTILIZZO: NOT FOUND

Ideal for ropes subjected to high dynamic loads

- Strops
- Lashing
- Cascade purchase system

RICHIEDI_INFO: NOT FOUND

GAMMA_COLORI: NOT FOUND:

CORE    DYNNEEMA SK99 XTR-PU. .....

The excellent creep qualities combined with a tenacity of 48.1 gr/den and a modulus of 1.801 gr/den allow the construction of an extremely resistant and reactive rope, dedicated to maneuvers subjected to high static and dynamic loads.
Thanks to the reduced specific weight of 0.974 kg/dm3 the rope is extremely light, while the protective treatment with a mix of polyurethane resins makes it water-repellent and highly resistant to wear.
The hot pre-stretch treatment called XTR takes the diameter/load ratio to the extreme by reducing the section and at the same time increasing the breaking load.

COVER    HI-TECH COVER COLLECTION

Our technical braid SK99 XTR-PU can be supplied both with or without cover , ranging in a vast and complete range of solutions specifically designed for racing.

In the Hi-Tech Cover Collection section it is possible to choose between 6 technical cover divided into two groups

I° GROUP ) Tecno mix cover resistance to extreme loads, temperatures and abrasions
                                                                                 II° GROUP ) Tecno mix cover resistance to high loads , with super grip, flexible and dynamic

The following table shows the technical characteristics of the DYNEEMA SK99 XTR-PU rope , uncovered and with tecno mix cover collection .

DYNEEMA SK99 XTR-PU			DYNEEMA SK99 XTR-PU + HIGH TECH COVER COLLECTION
Ø	SK99 XTR-PU UNCOVERED BRAID		Ø	SK99 XTR-PU + HIGH TECH COVER	B.technora Dyneema	B.Technora Dyneema Poliestere	B.Technora Poliestere	Cordura Dyneema Poliestere	Cordura Poliestere	Poliestere
Ø	SK99 XTR-PU UNCOVERED BRAID		Ø	SK99 XTR-PU + HIGH TECH COVER	B.technora Dyneema	B.Technora Dyneema Poliestere	B.Technora Poliestere	Cordura Dyneema Poliestere	Cordura Poliestere	Poliestere
Section	B.L.	Weight	Section	B.L.	Weight	Weight	Weight	Weight	Weight	Weight
mm	daN	gr/mt	mm	daN	gr/mt	gr/mt	gr/mt	gr/mt	gr/mt	gr/mt
1	300	1,2	1	-	-	-	-	-	-	-
1,5	450	1,8	1,5	-	-	-	-	-	-	-
2	580	2,4	2	300	4,8	4,7	4,6	4,2	4,6	4,6
2,5	-	-	2,5	450	5,9	5,8	5,7	5,1	5,6	5,7
3	1.250	6,5	3	580	7,8	7,7	7,6	6,7	7,4	7,4
3,5	2.150	9,5	3,5	940	9,2	9,0	9,3	8,2	9,0	9,2
4	2.900	11,5	4	1.250	12,3	12,2	12,5	11,0	13,1	12,4
5	4.050	17,0	5	2.150	19,0	18,9	19,2	16,9	18,7	18,4
6	5.150	21,0	6	2.900	26,2	25,6	26,4	23,2	25,5	26,5
7	7.900	30,3	7	4.050	38,5	37,8	38,5	34,0	37,3	37,9
8	9.650	38,6	8	4.550	50,3	49,5	50,5	44,6	48,8	48,9
9	11.950	49,5	9	5.150	60,6	59,7	61,3	53,7	58,8	59,2
10	14.600	59,0	10	7.900	71,5	70,5	72,0	63,6	69,5	69,4
-	-	-	-	-	-	-	-	-	-	-
12	18.500	78,0	12	11.950	102,0	100,3	102,5	90,4	99,0	96,2
-	-	-	-	-	-	-	-	-	-	-
14	25.200	111,0	14	14.600	137,3	135,5	137,9	121,6	133,0	133,6
-	-	-	-	-	-	-	-	-	-	-
16	30.000	143,0	16	18.500	182,0	179,2	182,8	161,6	176,4	177,5
18	-	-	18	25.200	214,4	211,0	215,2	189,9	207,1	221,6
20	-	-	20	26.600	268,0	263,5	269,2	237,4	259,6	260,1

The average values indicated are obtained from tests in the Benvenuti company laboratory on new line and may be changed without any notice. Other diameters are available on request. The static load of the rope must not exceed 20% of the breaking loads indicated in the table. The knot affects the breaking load with reductions of up to 60%. Splicing increases the diameter approximately 1.5 times. Exposure to atmospheric agents determines reductions in the breaking loads of the ropes, depending on the intensity and duration of the same and also on the composition and construction of the product.

To go into detail about the high tech cover collection click on one of the 6 available options.