CARATTERISTICHE_TECNICHE: NOT FOUND
CORE COVER
Resistence to peak of temp. 147 °C -
Tenacity 39,8 gr/den -
Coeff. di frictyion 0,06 -
Grip winch/stopper moderate -
Smoothness excellent -
Abrasion resistance optimal -
Specific weight 0,97 kg/dm -
Res. to continuos work Optimal -
Colors range wide -
Resistence to peak of temp. 147 °C -
Tenacity 39,8 gr/den -
Coeff. di frictyion 0,06 -
Grip winch/stopper moderate -
Smoothness excellent -
Abrasion resistance optimal -
Specific weight 0,97 kg/dm -
Res. to continuos work Optimal -
Colors range wide -
UTILIZZO: NOT FOUND
- Ideal for ropes subjected to high static loads
- - Strops
- - Lashing
- - Cascade purchase system
- - Halyards on hydraulic cylinder
- - Aft rigging
RICHIEDI_INFO: NOT FOUND
GAMMA_COLORI: NOT FOUND:
CORE DYNEEMA SK78 XTR ... .....
The excellent creep qualities combined with a tenacity of 39,8 gr/denx and a modulus of 1.314 gr/den allow the construction of an extremely resistant and reactive rope, dedicated to maneuvers subjected to high static and dynamic loads.
Thanks to the reduced specific weight of 0.974 kg/dm3 the rope is extremely light, while the protective treatment with a mix of polyurethane resins makes it water-repellent and highly resistant to wear.
The hot pre-stretch treatment called XTR takes the diameter/load ratio to the extreme by reducing the section and at the same time increasing the breaking load.
COVER HI-TECH COVER COLLECTION
La nostra treccia tecnica SK78 XTR puo' essere fornita sia scalzata che calzata spaziando in una vasta e completa gamma di soluzioni appositamente studiate per il racing .
The following table shows the technical characteristics of the DYNEEMA SK78 XTR-PU line , both uncovered and with a technical cover .
| DYNEEMA SK78 XTR-PU |
DYNEEMA SK78 XTR-PU + CALZE TECNICHE |
|||||||||
| Ø | SK78 XTR-PU TRECCIA SCALZATA |
Ø | SK78 XTR-PU + CALZE TECNICHE |
B.technora Dyneema |
B.Technora Dyneema Poliestere |
B.Technora Poliestere | Cordura Dyneema Poliestere | Cordura Poliestere | Poliestere | |
| Section | Breaking load |
peso | Sezione | Breaking load |
peso | peso | peso | peso | peso | peso |
| mm | daN | gr/mt | mm | daN | gr/mt | gr/mt | gr/mt | gr/mt | gr/mt | gr/mt |
| 1 | 210 | 1,2 | 1 | - | - | - | - | - | - | - |
| 1,5 | 330 | 1,8 | 1,5 | - | - | - | - | - | - | - |
| 2 | 450 | 2,5 | 2 | 210 | 4,6 | 4,6 | 4,6 | 4,1 | 4,6 | 4,6 |
| 2,5 | 750 | 3,6 | 2,5 | 330 | 5,7 | 5,6 | 5,6 | 5,0 | 5,5 | 5,4 |
| 3 | 1.050 | 4,8 | 3 | 450 | 7,4 | 7,4 | 7,5 | 6,6 | 7,3 | 7,2 |
| 3,5 | 1.350 | 8,0 | 3,5 | 750 | 9,1 | 9,1 | 9,2 | 8,1 | 8,9 | 8,8 |
| 4 | 2.300 | 9,9 | 4 | 1.050 | 12,3 | 12,1 | 12,4 | 10,9 | 13,0 | 12,9 |
| 5 | 3.000 | 15,0 | 5 | 1.350 | 18,8 | 18,6 | 19,0 | 16,7 | 18,5 | 18,3 |
| 6 | 4.700 | 23,5 | 6 | 2.300 | 25,9 | 25,6 | 26,2 | 23,0 | 25,2 | 24,9 |
| 7 | 6.510 | 30,5 | 7 | 3.000 | 38,0 | 37,5 | 38,1 | 33,7 | 36,9 | 36,5 |
| 8 | 8.250 | 37,5 | 8 | 3.900 | 49,7 | 49,0 | 50,0 | 44,2 | 48,3 | 47,8 |
| 9 | 9.430 | 50,0 | 9 | 4.700 | 60,0 | 59,2 | 60,7 | 53,2 | 58,2 | 57,6 |
| 10 | 12.080 | 58,8 | 10 | 6.510 | 71,0 | 69,9 | 71,3 | 63,0 | 68,8 | 68,1 |
| 11 | - | - | - | - | - | - | - | - | - | - |
| 12 | 16.000 | 92,1 | 12 | 9.430 | 101,0 | 99,5 | 101,5 | 89,5 | 98,0 | 97,0 |
| 13 | - | - | - | - | - | - | - | - | - | - |
| 14 | 20.900 | 125,5 | 14 | 12.080 | 136,0 | 133,7 | 136,5 | 120,4 | 131,7 | 130,4 |
| 15 | - | - | - | - | - | - | - | - | - | - |
| 16 | 25.500 | 156,8 | 16 | 16.000 | 180,0 | 177,4 | 181,0 | 159,6 | 174,7 | 173,0 |
| 18 | - | - | 18 | 20.900 | 212,2 | 208,8 | 213,1 | 188,0 | 205,0 | 203,0 |
| 20 | - | - | 20 | 22.000 | 265,0 | 261,1 | 266,5 | 235,0 | 257,0 | 254,4 |
The average values indicated are obtained from tests in the Benvenuti company laboratory on new line and may be changed without any notice. Other diameters are available on request. The static load of the rope must not exceed 20% of the breaking loads indicated in the table. The knot affects the breaking load with reductions of up to 60%. Splicing increases the diameter approximately 1.5 times. Exposure to atmospheric agents determines reductions in the breaking loads of the ropes, depending on the intensity and duration of the same and also on the composition and construction of the product.
High Tech Cover Collection
-
BTEC-DYN Cover
EXCELLENT RES. strain, abrasion and temperatureCHARACTERISTICS OF THE COVER- Resistance to peak temp of 325 °C
- Tear strength 31,4 gr/den
- Smoothness 0.09 friction coeff.
- Grip winch/stopper 0.09 friction coeff.
- Abrasion resistance excellent
- Specific weight 1.21 gr/cm3
- Continuous work resistance optimal
- Color variants 1 color only
1 COLORI_DISPONIBILI: NOT FOUND -
BTEC-DYN-PET Cover
EXCELLENT RES. strain, abrasion and temperatureCHARACTERISTICS OF THE COVER- Resist. to peak temp of 301 °C
- Tear strength 25,7 gr/den
- Smoothness 0,10 friction coeff.
- Grip winch/stopper 0,10 friction coeff.
- Abrasion resistance excellent
- Specific weight 1.26 gr/cm3
- Continuous work resistance optimal
- Color variants wide
5 COLORI_DISPONIBILI: NOT FOUND -
BTEC-PET Cover
EXCELLENT RES. strain, abrasion and temperature5 COLORI_DISPONIBILI: NOT FOUND -
-
CRD-DYN-PET Cover
ELEVATED RES. strain , abrasions and temperatures5 COLORI_DISPONIBILI: NOT FOUND -
CRD-PET Cover
ELEVATED RES. strain , abrasions and temperatures5 COLORI_DISPONIBILI: NOT FOUND -
PET Cover
ELEVATED RES. strain , abrasions and temperatures6 COLORI_DISPONIBILI: NOT FOUND
